Use your browser's print option to print this page.

Beachcomber Hot Tub Maintenance Schedule

Initial fill / Nature² replacement

Add 1 pint Eliminate according to lable directions.      Filter water overnight, and rinse the filter cartidge as needed.      Insert New Nature² unit. Run system on high speed.      Add 2 Tbsp Chlor Blast per 300 gal. water      Let system run on high for additional 15 minutes. Leave cover open for a total of 30 minutes      Add 2 capfuls Soft per 300 gal. water.      Add 3.5 oz Pure Blue per 300 gal water. Adjust pH, Alkalinity, and Calcium Hardness as needed.

After Each Use

Add 1 Tbsp Bromate per 300 gal. water      Run system with cover open for 15-30 minutes.

Weekly Treatment

Run system on high speed.      Add 1-2 Tbsp. Chlor Blast per 300 gal water.      Add 2 oz Pure Blue per 500 gal water.   The following day      Add 3.5 oz Pure Enzyme per 300 gal water.      Add 1 capful Soft per 300 gal water.      Add 1 oz Eliminate Plus per 300 gal water. Adjust pH, Alkalinity, and Calcium Hardness as needed.

Periodic Maintenance

Hot Tub should be drained and wiped down every 2 to 4 months depending on use. Days between draining = Gallons of water ÷ 3 ÷ average daily bather load. Filter cartridge should rinsed clean every 2 weeks ( or as needed ), and treated with Filter Pure at least once a month. Nature² unit should be replaced every 4 months. For cloudy water or odor, treat water with system running with 2-4 Tbsp. Chlor Blast per 300 gal water. Allow filter to run until tub clears or odor is gone. ( additional doses of Chlor Blast may be needed, maintain a 3-8ppm level until tub is clean ). During the warmer months, the cover should be taken apart and cleaned with Cover All and allowed to dry. This will help extend the life of the cover, and prevent musty odors.